在线粒度分析仪的工业应用

催化裂化催化剂应具有良好的颗粒分布,以保证良好的流化状态。一般要求催化剂颗粒<40μm的不大于25%,40～111μm不小于50%,>111μm的不大于30%。目前催化裂化催化剂生产过程中通常采用压力式喷雾干燥成型工艺,用高压泵把制备好的胶体在与热空气的接触中,迅速脱去水分汽化,即得到粉状或颗粒状干燥产品。现有生产装置在生产过程中,因分析结果滞后,无法及时指导装置调整催化剂成品的粒度分布,特引进使用了在线粒度分析仪。通过对该分析仪的简单研究,介绍了该分析仪的使用现状,并对使用中出现的问题进行了简单总结。     

Real-scale DEM simulations on the fault evolution process observed in sandbox experiments

The study of fault structures and stress states in accretionary prisms is important to elucidate the building and releasing of seismic energy as they control the generation of great earthquakes and tsunami. In this paper, we present the evolution process of three-dimensional fault structures performed in sandbox simulations using a discrete element method (DEM). To realize a real-scale sandbox simulation, we developed state-of-the-art techniques in high performance parallel computing for the DEM and performed the world’s largest DEM simulation using up to 1.9 billion particles with a similar grain size as real sand to identify the three-dimensional fault structure. The DEM simulations reproduced the undulation of fault structures, similar to those commonly found in nature. In addition, the characteristic grain motion was observed near the frontal fault before the commencement of the uplift event of the sand bed, which could be a precursor of tectonic events behind accretionary prism formation.     

NiH/Hβ催化剂的制备及催化正己烷异构化性能

采用浸渍还原法制备了一种新型镍氢化物/分子筛（NiH/Hβ）烷烃异构化催化剂，考察了催化剂制备条件及反应条件对其催化正己烷异构化性能的影响。结果发现，当活性组分质量分数为0.5%，反应温度为300 ℃，反应压力为2.0 MPa，氢/油摩尔比为4.0及质量空速为1.0 h^-1时，NiH/Hβ催化剂催化正己烷异构化活性最优，正己烷的转化率为83.0%，异构烷烃的选择性与收率分别达到78.6%、65.2%。根据实验结果，提出了NiH/Hβ催化剂催化正己烷异构化反应机理，证明NiH金属活性中心具有良好的加氢/脱氢功能。     

Effect of in-app components,medium, and screen size of electronic textbooks on reading performance,behavior, and perception

Although many app-based textbooks are available for students, reading have not been thoroughly outlined. This study aimed to understand how changes from paper to electronic textbooks have affected the academic reading task, investigate student users’ perceptions of in-app components and screen sizes, and identify issues affecting in-app components and task requirements. A mixed factorial design experiment was employed. Results showed that there were no significant changes in comprehension and time spent reading between print text and the iPad. Yet, student highlighting, notetaking, and reading behavior and perception significantly changed based on condition. In addition, students struggled to use in-app components and found them frustrating especially when accounting for sentence splitting. The findings presented can assist in understanding the changes in student reading behavior, which can be used to improve interface design of future e-textbooks.     

Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 via titanium and boron co-doping

Titanium and boron are simultaneously introduced into LiNi_0.8Co_0.1Mn_0.1O₂ to improve the structural stability and electrochemical performance of the material. X-ray diffraction studies reveal that Ti⁴⁺ ion replaces Li⁺ ion and reduces the cation mixing; B³⁺ ion enters the tetrahedron of the transition metal layers and enlarges the distance of the [LiO₆] layers. The co-doped sample has spherical secondary particles with elongated and enlarged primary particles, in which Ti and B elements distribute uniformly. Electrochemical studies reveal the co-doped sample has improved rate performance (183.1 mAh·g^-1 at 1 C and 155.5 mAh·g^-1 at 10 C) and cycle stability (capacity retention of 94.7% after 100 cycles at 1 C). EIS and CV disclose that Ti and B co-doping reduces charge transfer impedance and suppresses phase change of LiNi_0.8Co_0.1Mn_0.1O_2.     

Dual-mode optical thermometry based on Bi3+/Eu3+ co-activated BaGd2O4 phosphor with high sensitivity and signal discriminability

A series of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors with dual-emitting centers were prepared by high-temperature solid-state method. X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), fluorescence spectroscopy, lifetime decay curve and variable temperature emission spectroscopy were used to systematically study the structure, luminescence performance and temperature characteristics. Under ultraviolet (UV) excitation, the BaGd₂O₄:Bi³⁺,Eu³⁺ phosphor showed a broad-band emission in the blue region corresponding to transitions of Bi³⁺ ions and the sharp red light emission corresponding to Eu³⁺ ions. The Bi³⁺ and Eu³⁺ ion emission peaks were well-separated, which meets a prerequisite for efficient temperature signal resolution measurement. The fluorescence intensity ratio (FIR) technique was used to measure the different temperature response characteristics between Bi³⁺ blue emission and Eu³⁺ red emission. When the temperature varies from 293 K to 473 K, the relative temperature sensitivity (S_r) of BaGd₂O₄:Bi³⁺,Eu³⁺ phosphors is obtained, was determined as 1.0182%K⁻¹. In addition to calculating the relative sensitivity by FIR technology, we can also obtain the value of S_r through experiments and formulas related to the decay life, and found to be 1.0651%K⁻¹. Therefore, BaGd₂O₄: Bi³⁺,Eu³⁺ phosphor is an excellent non-contact optical temperature measurement material.     

Speciation of copper in high chloride concentrations,in the context of corrosion of copper canisters

Canisters with a cast iron insert for mechanical strength and a 50-mm thick copper shell as corrosion protection are planned to be used for disposal of spent nuclear fuel in Sweden and Finland. Chloride can be considered “beneficial”, as it promotes active dissolution of copper rather than passivation (which might result in pitting), but a high concentration of chloride in solution would increase the driving force for corrosion through the formation of soluble copper chloro complexes. Thermodynamic calculations are performed in this study with the PHREEQC software and three of its accompanying databases, and a comparison with experimental data is performed to select the database to be used when evaluating repository performance. The activity coefficient models are given special attention. For the assessment of chloride-assisted corrosion of a KBS-3 canister, chloride concentrations pessimistically up to 5 mol/kg are used (in Finland and Sweden, the groundwater and bentonite porewater chloride concentrations are not expected to exceed 1 mol/kg). The resulting copper solubilities are then considered in different mass transport cases.     

防气窜固井技术研究

从气窜机理、气窜预测方法、提高水泥浆防气窜性能、防气窜固井工艺技术四个方面进行研究,为固井防气窜提供理论依据,进而提升防气窜固井技术。     

Growth and characterization of Ag–Al2O3 composites thin films for thermoelectric power generation applications

Thin films of Ag–Al₂O₃ composites were successfully grown on Si substrate by thermal evaporation method and their thermoelectric performance was modulated using post growth annealing technique. Pellet of Ag and Al mixture having 1:4 ratio was evaporated on Si substrate using the vacuum tube furnace. As grown sample was cut into pieces and post-growth annealing was performed at different temperatures using muffle furnace. XRD results suggested that as-deposited sample has amorphous nature, but crystallinity of the samples increase as an annealing temperature increase from 600 to 900^oC. This structural behavior of annealed samples was further verified by Raman spectroscopy measurements. We have reported an optimal annealing temperature (800 ⁰C) for the best thermoelectric performance of investigated composites. At this specific annealing temperature, charge carriers are highly mobile which resulted in the enhancement of thermoelectric power generation performance of Ag–Al₂O₃ composite. The value of power factor (1.38x10^?2 W/m-K^?2) reported in the current study is the highest value for Ag–Al₂O₃ composites so for reported in the literature according to the best of our knowledge.